View cart  |  Upcoming Events  |  Request a Catalog  |  Site Map  |  Contact us  |  1-800-542-5243
Southern Police Equipment Supply
Home > Shop by Brand > E/T Lights > Triage Lights
     

E/T Lights Triage Lights

SKU: Version 1, Version 2, Version 3, Version 4, Version 5L, Version 5NL, Version 6.8IR, Version 6.8A
Manufacturer: E/T Lights Fire/EMS/Rescue
Retail Price: $39.99
Our Price: $37.99
You Save: $2.00
* Select Version

Quantity

  An * indicates a required field.


Manufacturer's Description

The following features of the E/T Light™ make it the best choice among triage and emergency lighting devices: 
- E/T Lights combine all triage conditions into one illuminated device (Red, Amber, Green, Blue) 
- E/T Lights are available in infrared 
- All versions have a last-selection memory 
- Version 3 and 4 have a selection lock to avoid inadvertent change of the color selection 
- E/T Lights last 3 to 8 days (dependent on color selection) continually on 
- E/T Lights last 7 to 12 days when set to a flashing selection 
- E/T Lights improve response times by support personnel especially during bad weather conditions and low light, no light situations 
- E/T Lights are reusable 
- E/T Lights are reprogrammable 
- E/T Lights reduce weight and volume carried by First Responders 
- E/T Lights reduce the cost for this type of equipment up to 97% 
- E/T Lights reduce landfill and disposal costs 
- E/T Lights are more environmentally friendly than chemical lights sticks. One E/T Light™ replaces over 70 blue colored chemical light sticks. 
- E/T Lights have a battery shelf life of 5 years, operate on one (1) CR2 3V battery

CHECK OUT the YouTube VIDEO: http://www.youtube.com/watch?v=CkoO-YWagpA

 

Version 5NL E/T Light - red LED on continuous, red blink slow, amber LED on

                                 continuous, amber LED blink slow, green LED on continuous,

                                  green LED blink slow, blue LED on continuous, blue LED blink slow,

                                  strobe LEDs slow, strobe LED’s moderate, strobe LEDs fast,

                                  OFF then repeats (no lock)

Version 5 L E/T Light - red LED on continuous, red blink slow, amber LED on

                                 continuous, amber LED blink slow, green LED on continuous,

                                 green LED blink slow, blue LED on continuous, blue LED blink

                                slow, strobe LEDs slow, strobe LEDs moderate, strobe LEDs

                                 fast, OFF then repeats (Lock feature is activated)

Versions 6.8IR: NSN - 6230-01-605-9635 - Field programming of 6.8IR E/T Light is done by manipulating the

                                  switch according to the instructions  found in the labels. The programming is done one

                                  hand and takes less than 30 seconds. The modes that are included for each field

                                  programmable versions follow: 

Mode 1 (8): IR on continuous, IR blink slow, OFF then repeats (no lock)

Mode 2 (9): IR on continuous, IR LED blink slow, IR LED blink fast, OFF then repeats (no lock)

Mode 3-Default (10): IR LED on continuous, IR LED blink slow, red on continuous, green LED on continuous, blue LED on continuous, OFF then repeats (no lock)

Mode 4 (11): IR LED on continuous, IR LED blink slow, red on continuous, green LED on continuous, blue LED on continuous, both red and green LED’s on continuous, OFF then repeats (no lock)

Mode 5 (12): IR LED on continuous, IR LED blink slow, red LED on continuous, red LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, OFF then repeats (no lock)

Mode 6 (13): IR LED on continuous, IR LED blink slow, red LED on continuous, red LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, both red and green LED’s on continuous, OFF then repeats (no lock)

Mode 7 (14): IR LED on continuous, IR blink slow, red LED on continuous, red LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, strobe all 4 LEDs slow, strobe all 4 LEDs moderate, strobe all 4 LEDs fast, OFF then repeats (no lock)

Modes 8-14 (above) are identical to modes 1-7 except that modes 8-14 have the “LED lock*” feature.

·         Note –LED lock – Is a feature that locks in the color selection after 3 seconds of having been left on that one color/flash selection. This does two things. First it makes it difficult for a patient to easily change the triage status set by the medic (unlock can be customized upon request) and two it assures the user that even if the switch is activated inadvertently the color selection will not change.      

Mode 15 (Light Grenade/Distraction Mode): Pressing and releasing the pushbutton starts a 6.4 second delay timer during which time no LEDs are illuminated. Upon timeout all 4 LEDs strobe fast and continue to strobe fast until the pushbutton is pressed and held depressed for approximately 2 seconds causing LED strobing to switch OFF.

 

 Version 6.8A: NSN - 6230-01-605-9650 - Field programming of 6.8A E/T Light is done by

                               manipulating the switch according to the instructions found in the

                               labels. The programming is done one hand and takes less than 30 seconds.

                               The modes that are included for each field programmable versions follow:

Mode 1 (8): red LED on continuous, amber LED on continuous, green LED on continuous, blue LED on continuous, OFF then repeats (no lock)

Mode 2 (9): red LED on continuous, amber LED on continuous, green LED on continuous, blue LED on continuous, both red and green LEDs on continuous, OFF then repeats (no lock)

Mode 3 (10 -Default): red LED on continuous, red LED blink slow, amber LED on continuous, amber LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, OFF then repeats (no lock)

Mode 4 (11): red LED on continuous, red blink slow, amber LED on continuous, amber LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, both red and green LEDs on continuous, OFF then repeats (no lock)

Mode 5 (12): red LED on continuous, red blink slow, amber LED on continuous, amber LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, strobe LEDs slow, strobe LED’s moderate, strobe LEDs fast, OFF then repeats (no lock)

Mode 6 (13): red LED on continuous, red blink slow, amber LED on continuous, amber LED blink slow, green LED on continuous, green LED blink slow, blue LED on continuous, blue LED blink slow, both red and green LEDs on continuous, strobe LEDs slow, strobe LEDs moderate, strobe LEDs fast, OFF then repeats (no lock)

Mode 7 (14): red LED on continuous, red LED blink slow, red LED blink fast, amber LED on continuous, amber LED blink slow, amber LED blink fast, green LED on continuous, green LED blink slow, green LED blink fast, blue LED on continuous, blue LED blink slow, blue LED blink fast, strobe LEDs slow, strobe LEDs moderate, strobe LEDs fast, OFF then repeats (no lock)

Modes 8-14 are identical to modes 1-7 except that modes 8-14 have the “LED lock” feature. The unit defaults to mode 10 if never previously configured.

Mode 15 (Grenade Mode): Pressing and releasing the pushbutton starts a 6.4 second delay timer during which time no LEDs are illuminated. Upon timeout all 4 LEDs strobe fast and continue to strobe fast until the pushbutton is pressed and held depressed for approximately 2 seconds causing LED strobing to switch OFF.

 

 

Please note: Although we try our best to ensure correct product information on our website, we are not responsible for any mistakes or incorrect information. We welcome you to call us with any questions you may have prior to placing your order.